BRAKE/TRANSMISSION
INTERLOCK MANUAL
OVERRIDE
• The manual override may be used in
the event that the shift lever should
fail to move from PARK with the Key
Fob in the ON position and the brake
pedal pressed.
• To operate the shift lock manual
override, perform the following steps:
• Turn the Key Fob to the ON position
but do not start the engine.
• Firmly set the parking brake.
• Using a flat-bladed screwdriver,
carefully remove the shift lock
manual override cover which is
located on the PRNDL bezel.
• Press and maintain firm pressure
on the brake pedal.
• Using a screwdriver, reach into the
manual override opening. Press
and hold the shift lock lever down.
• Move the shift lever into the
NEUTRAL position and start the
vehicle.
• Have your vehicle inspected by your
local authorized dealer if the shift
lock manual override has been used.
UTILITY
38
