DN-7039-A 108M Wireless Router User Guide
New firmware versions are posted at www.digitus.info and can be downloaded for free. If
e its configuration settings,
To upgrade the router's firmware, follow these instructions:
digitus.info).
e file in the TFTP server’s
3. oaded file name into the File Name box.
PC that runs the TFTP server in the TFTP Server’s IP
ware Version - displays the current hardware version. The hardware version of
Note:
e the firmware is
r the Upgrading has been finished.
This page (shown in figure 5-41) allows you to restore the factory default settings for the
router.
the router is not experiencing difficulties, there is no need to download a more recent
firmware version, unless that version has a new feature that you want to use.
Note: When you upgrade the router's firmware, you may los
so make sure you write down the router settings before you upgrade its firmware.
1. Download a more recent firmware upgrade file from the DIGITUS website
(www.
2. Run a TFTP Server on a PC on your LAN, and take th
path.
Type the downl
4. Type the IP Address of the
Address field.
5. Click the Upgrade button.
Firmware Version - displays the current firmware version.
Hard
the upgrade file must accord with the current hardware version.
1. Do not turn off the router or press the Reset button whil
being upgraded.
2. The router will reboot afte
5.11.3 Factory Defaults
Figure 5-41: Restore Factory Default
Clic e iguration settings to their default values.
Subnet Mask: 255.255.255.0
when the default settings are restored.
This page (shown in figure 5-42) allows you to reboot the router.
k th Restore button to reset all conf
• The default User Name: admin
• The default Password: admin
• The default IP Address: 192.168.1.1
• The default
Note: Any settings you have saved will be lost
5.11.4 Reboot
- 48 -
