SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 716 NETWORK CODE
DESCRIPTION:
This MMC provides secondary network access code when the call is routed to the secondary
network . Maximum entries are up to 16 and 10 digits maximum in length each.
NOTE:
The second entry may be selected as a primary secondary network. By default, 132(MCL Digital
Access). If dialed digits are not matches to the entry in the LCR DIGIT TABLE (MMC 710) and
started with 0, then the network code in the second entry will be dialed out by the system prior to
transmitting dialed digit.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 716
Display shows
NETWORK CODE
1:121
2. Enter in index number (e.g., 3)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
NETWORK CODE
3:161
3. Enter the desired access in via dial keypad
Press RIGHT soft key to enter and return to step 2 and
enter more entries
NETWORK CODE
3:163
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: 1: 121
2: 132
3: 161
RELATED ITEMS: MMC 710 LCR DIGIT TABLE
MMC 711 LCR TIME TABLE
MMC712 LCR ROUTE TABLE
MMC 713 LCR MODIFY DIGIT TAB
