SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
A Key 19; acts as to toggle between upper case and case
ACTION DISPLAY
1. Press TRSF 714
Display shows
DID DIGIT (001)
DGT:
2. Enter valid index number, e.g., 005, via dial key pad
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
DID DIGIT (005)
DGT:
3. Enter the DDI number (e.g.,4603831)
via dial key pad and press RIGHT soft key to move
cursor.Max digit is 10
DID DIGIT (005)
DGT:4603831
4. Enter destination via dial key pad for day mode
OR
Press UP or DOWN key to make selection
If valid entry, system advances cursor
DID DIGIT (005)
DAY DEST :204
5. Enter destination via dial key pad for night mode
OR
Press UP or DOWN key to make selection
If valid entry, system advances cursor
DID DIGIT (005)
NIGHT DEST :204
6. Enter 1 for yes or 0 for no call waiting
If entry is NO, press RIGHT soft key to move cursor
If entry is YES, system will advance cursor
DID DIGIT (005)
CALL WAIT : NO
7. Enter in the digits to be deleted via dial key pad
OR
Press UP or DOWN key to make selection
DID DIGIT (005)
NOF DEL DGT :3
8. Enter name using above table and press
RIGHT soft key to return to step 2
DID DIGIT (005)
NAME:_
9. Press TRSF to store and exit OR
Press SPK to store and advance to next MMC
DEFAULT DATA: There are three entries (001, 002 and 003)
001 002 003
DIGITS 2QQ 3QQ 5QQ
DAY DEST B B B
NIGHT DEST B B B
CALL WAIT NO NO NO
NOF DEL DGT 0 0 0
NAME NONE NONE NONE
