SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 712 LCR ROUTE TABLE
DESCRIPTION:
The LCR ROUTE TABLE has the responsibility for the selection of a specific trunk group in the
completion of an outward bound call. This table works in conjunction with LCR DIGIT TABLE, LCR
TIME TABLE, LCR COS TABLE and LCR MODIFIED DIGITS TABLE. After the user dials a valid
digit string, the system will use the LCR ROUTE TABLE to select a specific predetermined trunk
group. There is a maximum number of 16 routes available beginning with the ROUTE NUMBER 1.
If more than one trunk group are available for call completion, the system will use the first
designated trunk group and then start to utilize succeeding trunk groups. If all trunk groups are
busy in a selected route, call queue will become active and allocate trunks as they become
available.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 712
Display shows
LCR ROUTE (01:1)
C:1 G:NONE M:---
2. Dial LCR ROUTE index number 1–16 (e.g., 05)
OR
Press UP or DOWN to selected index and press RIGHT
soft key to move cursor and advance to next step 3
LCR ROUTE (05:1)
C:1 G:NONE M:---
3. Dial TIME BAND index number 1–4 (e.g., 2)
OR
Press UP or DOWN to selected index and press RIGHT
soft key to move cursor and advance to next step 4
LCR ROUTE (05:2)
C:1 G:NONE M:---
4. Dial LCRCOS number 1–8 (e.g., 4)
OR
Press UP or DOWN to selected COS and press RIGHT
soft key to move cursor and advance to next step 5
LCR ROUTE (05:2)
C:4 G:NONE M:---
5. Dial TRUNK GROUP access code 80–89 (e.g., 81)
OR
Press UP or DOWN to selected access code
and press RIGHT soft key to move cursor and advance to
next step 6
LCR ROUTE (05:2)
C:4 G:81 M:---
