SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 710 LCR DIGIT TABLE
DESCRIPTION:
The LCR DIGIT TABLE contains all numerical digits for the completion of outgoing call placement.
This table works in conjunction with LCR ROUTE TABLE, LCR TIME TABLE and LCR MODIFY
DIGITS TABLE. There is a maximum of 500 entries with a digit string length of ten numerical
digits. This system will automatically maintain entered digit strings in numerical order. The
characters Q and # are also accepted, for use with feature codes.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 710
Display shows
LCR DIGIT (001)
DIGIT:
2. Dial LCR entry (e.g.,005)
OR
Press UP or DOWN to select entry and press RIGHT soft
key to move cusor
LCR DIGIT (005)
DIGIT: _
3. Enter LCR digit string via the dial key pad and press
RIGHT soft key
OR
Press LEFT soft key to return to step 1
LCR DIGIT (005)
DIGIT:305426
4. Enter digit lenght (00–31)
Cursor will move to RT:
Enter route selection (1–16)
OR
Press LEFT soft key to return to length value
Valid entry will return you to step 1
LCR DIGIT (005)
LENGHT:10 RT:01
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
