SIP Trunking
Programming for ABS SIP Trunks
Strata CIX Programming 05/08 C-17
SIP Trunking
Creating the Channel Group
1. Go to IP Telephony > SIP trunking. The first tab is Channel Group setting, Program 326.
2. Channel Group Setting - In this example SIP Trunk Channel Group 8 is created.
3. FB01 - Equipment Number - Enter the Cabinet number and slot number (four digits).
In this example 0203.
4. FB02 - LAN interface number = 1 (MIPU/GIPU only has one interface)
5. FB03 - Strata Net Channels – The TOTAL number of ports on this card that are going to be dedicated
to SIP Trunking. On further tabs, each OLG or ILG can be for a different service provider and still be in
the same channel group. This entry is the total number of trunks from ALL the service providers.
6. FB04 - RBT tone on incoming call - Enable for the CIX to provide RBT (ring back tone). Coordinate this
response with the Internet Service Provider (ISP) trunk provider.
