IPT2008-SDL Settings
Configurations
Strata CIX and CTX Telephones Administrator 12/04 43
Input Timer Mode Setting Screen
1. Select Configuration > Others > Input Timer
Mode. The Input Timer Mode Setting screen
displays.
2. Press the ON or OFF soft keys to change the set
value.
3. Press the SET soft key to accept the change.
...or press the CANCEL soft key to cancel the
change.
The setting is underlined in the Others Setting
screen display.
Input Timer Value Setting Screen
³ Select Configuration > Others > Input Timer
Value. The appropriate screen displays (shown
right).
³ To Change or Add Information on this screen
1. Enter the New Repeat Delay Timer to change the
setting.
Note Use the dial pad 1~3 and 9RO W to backspace.
For Input Timer Value: 1 (fast) to 3 (slow)
2. Press the SET soft key to accept the change
...or press the CANCEL soft key to cancel the
change and go to the Other Setting screen.
Notes
• Pressing the SET soft key can give you an Error Screen if you incorrectly entered
the Station ID.
• Press the OK soft key on the Error Screen to correct the entry. Five seconds after
the Error Screen displays, the screen automatically goes back to the Repeat Delay
Timer or Repeat Rate Time screen and the number that resulted in an error will
display.
+PRWV6KOGT/QFG
10
1((
=5'6?=%#0%'.?
+PRWV6KOGT8CNWG
%WTTGPV
0GY(CUV5NQY
$CEMURCEG8QN&QYP
=5'6?=%#0%'.?
