Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 10 of 15
Feature Specification
Standard 802.11g/n
access point based on
IEEE 802.11n draft 2.0
standard
●
Optional on all models
Console or auxilliary
port
●
RJ-45
One USB 1.1 port for
advanced aecurity
features such as
security tokens or USB
Flash
●
One USB 1.1 port on Cisco 881 and Cisco 888 Series Routers
●
USB devices supported:
USB eTokens
USB Flash
Note: USB 1.1 port cannot be used for connecting external devices other than those specified at:
http://www.cisco.com/en/US/partner/prod/collateral/modules/ps6247/product_data_sheet0900aecd8
0232473.html.
ISDN BRI S/T Available on:
●
Cisco 888 for out-of-band management and dial backup or primary
●
Point-to-multipoint configurations
3G express card
modem
Available on:
●
Cisco 881G for out-of-band management and backup or primary
●
Cisco 888G for out-of-band management and backup or primary
External power supply
●
Universal 100- to 240-VAC input; 60W, 12-VDC output
Inline PoE
●
Optional internal adapter for inline PoE on 2 switch ports for IP phones or external wireless
access points; 802.3af compliant and Cisco PoE compliant
G.SHDSL specifications
●
Conexant Chipset
●
Support for 2- and 4-wire modes
●
Support for Annex A and Annex B starting with Cisco IOS Software Release 12.4(15)XZ
●
Support for wetting current (Section A.5.3.3 of G.991.2)
●
Support for dying gasp; uses power status bit (Section 7.1.2.5.3 of G.991.2) for signaling
●
Symmetrical WAN speeds of 2.304 Mbps per pair
SRST model
specifications
●
Digital-signal-processor fax and voice DSP module PVDM2-16
FXS voice-port specifications:
●
Tip and ring interfaces for each FXS port (subscriber line interface card [SLIC])
●
Ring voltage
●
Ring frequency
●
Ring waveform
●
Ring load
●
Ringer Equivalence Number (REN)
●
Loop resistance
●
On- and off-hook characteristics
●
On-hook voltage (tip and ring)
●
Off-hook current
●
RJ-11 FXS port terminating impedance option
BRI voice-port specifications:
●
Interface type
●
Compliance
●
Safety conformance
●
ITU compliance
●
Interface
●
ISDN digital access
●
Physical connector
●
Phantom power
Wireless specifications
●
2.4 GHz
Data rates supported
●
802.11b: 1, 2, 5.5, 6, 9, and 11 Mbps
●
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
●
802.11n: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, and m0-m15
