Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 9
Network Management and Installation Tools
The Cisco 815 supports a range of network-management and ease-of-installation tools.
CiscoWorks, a Web-based network management suite, provides the ability to remotely configure,
administer, monitor, and troubleshoot the Cisco 815. With the increased visibility into network
behavior, customers are able to quickly identify performance bottlenecks and track long-term
performance trends. CiscoWorks also provides sophisticated configuration tools to optimize
bandwidth and utilization across expensive and critical WAN links in the network.
CiscoView, part of CiscoWorks, is a Web-based tool that graphically provides real-time status of
the Cisco 815. It can navigate to display monitoring information on interfaces and provide dynamic
status, statistics, and comprehensive configuration information.
Product Specifications
Table 3. Cisco 815 Product Specifications
Features Specifications
Physical Interfaces/Ports
●
One F-type standard coax interface for HFC network
Designed to support CableLabs
®
DOCSIS 2.0, 1.1, 1.0
●
One 10/100BASE-TX Fast Ethernet port (RJ-45)
Automatic speed detection
Automatic duplex negotiation
IEEE 802.1Q VLAN trunking and inter-VLAN routing
●
One auxiliary (AUX) port
RJ-45 jack with EIA/TIA-232 interface
Asynchronous serial data terminal equipment (DTE) with
full modem controls: Carrier Detect, data set ready (DSR),
Request To Send (RTS), Clear To Send (CTS)
Asynchronous serial data rates up to 115.2 kbps
●
One console port
RJ-45 jack with EIA/TIA-232 interface
Asynchronous serial DTE
Transmit/receive rates up to 115.2 kbps (default 9600 bps,
not a network data port)
No hardware handshaking such as RTS/CTS
●
Hardware encryption for IPsec VPN on 815-VPN model
Dimensions and Weight
●
Width: 11.2 in. (28.4 cm)
●
Height: 3.1 in. (7.85 cm)
●
Depth: 8.7 in. (22.1 cm)
●
Weight (maximum): 2.9 lb (1.32 kg)
Power
●
Locking connector on power socket
●
AC input voltage: 100 to 240VAC
●
Frequency: 47 to 64 Hz
●
AC input current: 0.5 amps
●
Power dissipation: 20W (maximum)
Environmental
●
Operating temperature: 32 to 104°F (0 to 40°C)
●
Nonoperating temperature: –4 to 149°F (–20 to 65°C)
●
Relative humidity: 10 to 85% noncondensing operating; 5 to
95% noncondensing, nonoperating
Safety
●
UL 1950
●
CSA 22.2—No. 950
●
EN60950
●
EN41003
●
AUSTEL TS001
●
AS/NZS 3260
●
ETSI 300-047
●
BS 6301 (power supply)
