3
Load one sheet, printing-side up, in the Top Paper
Feed Slot.
Insert the paper until it touches the far end of the
tray lightly.
Important
• If you load a sheet larger than A2, the sheet may fall behind the printer under its own weight. Put your hand
under the sheet to support it and prevent it from falling.
Note
• If it is difficult to load rolls from the front of the printer, load them from the back of the printer.
If the printer has a Spectrophotometer Unit (option), lowering the Up-down Unit makes it easier to perform op-
erations from the front of the printer.
(See "Lowering the Up-down Unit of the Spectrophotometer Unit (option)
Manually.") →P.16
4
Move the Width Guide (a) to match the size of pa-
per loaded.
Set the Width Guide against the edge of the paper
to prevent the paper from becoming crooked or
wrinkled.
5
Press the OK button.
•
If a print job was received
After the paper is advanced, the printer starts printing the print job.
•
If no print job was received
The printer now starts feeding the paper.
Loading Sheets in the Feed Slot
iPF6450
Basic Guide
Handling Paper Handling sheets
20
