BT Versatility
Owner's Manual
121
The following table lists the available ‘Extensions’ options, with their defaults, if applicable.
Feature Default
Name programming None programmed See page 61.
Restriction classes
• Day class of service
• Night class of service
All Extensions in Class 1. See page 63.
Tone protect Extensions do not accept tone See page 51.
Page protection Extensions accept paging See page 39.
Open door restriction All Extensions enabled See page 83.
3.1khz extensions Not programmed See page 102.
Individual CLI stores No stores programmed See page 37.
Sys. Speed no. override No override programmed See page 63.
Voice boxes Not programmed See page 67.
Extension disconnect All Extensions connected See page 88.
VM Capacity % Used See page 67
Permanent CLIR Not programmed See page 101.
Permanent COLR Not programmed See page 102.
No call logging Not programmed See page 84.
External Diversion No trunk to trunk See page 86.
Examine passwords
• Extension lock password
• Voicemail password
• System voicemail box
Default 123
Default 1111
Default 1111
See page
89.
Restrict use of PA All Extensions can make
announcements
See page 39.
Tele-secretary
• Tele-secretary on
• Tele-secretary off
Tele-secretary off See page 102.
Port swapping Not programmed See page 89.
Hot line Not programmed See page 60.
Manager/secretary Not programmed See page 40.
Expansion Console Extensions None equipped See page 18.
25 Hz ringing Auto Detect See page 90
Reverse cadence Not set See page 90
Keypad Feedback On for all Extensions See page 90
Flexible Numbering Not set See page 92
Call Recording OFF for all Extensions See page 72
Send Specific MSN/DDI Not set See page 90
