bintec RS353j
09.12.2014
Subject to technical alterations
Page 4 / 11
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
bintec RS353j (5510000375) IP Access Router; Desktop device with opt. 19"Rack; incl. VDSL2(opt.) & ADSL2+
modem (Annex B/J,ISDN); 1x ISDN BRI; incl. 5 IPSec tunnel , certificates, HW
encryption; 4+1 Gigabit Eth. switch; USB Port Typ B; USB port; german and intern.
version.
Features
ISDN
Bit rate adaption V.110 (1,200 up to 38,400 bps), V.120 up to 57,600 kbps (HSCSD) for connection to GSM
subscribers
B channel protocols Excellent interoperability with other manufacturers (Raw HDLC, CISCO HDLC, X.75)
ISDN auto-configuration Automatic recognition and configuration of ISDN protocols
ISDN leased lines Supported leased lines: D64S, D64S2, TS02, D64S2Y
X.31 over CAPI Support for various connection paths: X.31/A for ISDN D-channel, X.31/A+B for ISDN B-channel,
X.25 within ISDN B-channel (also leased lines)
CAPI CAPI 2.0 with CAPI user concept (password for CAPI use)
ISDN protocols Euro-ISDN (Point-to-mulitpoint/Point-to-point), 1TR6 and other national ISDN protocols
Routing
Multicast IGMP Support of Internet Group Management Protocol (IGMP v1, v2, v3) for the simultaneous distribution
of IP packets to several stations
RIP Support of RIPv1 and RIPv2, separated configurable for each interface
Multicast IGMP Proxy For easy forwarding of multicast packets via dedicated interfaces
Extended RIP Triggerd RIP updates according RFC 2091 and 2453, Poisened Rerverse for a better distribution of
the routes; furthermore the possibility to define RIP filters for each interface.
Multicast inside IPSec tunnel Enables the transmission of multicast packets via an IPSec tunnel
Policy based Routing Extended routing (Policy Based Routing) depending of diffent criteria like IP protocols (Layer4),
source/destination IP address, source/destination port, TOS/DSCP, source/destination interface and
destination interface status
Protocols / Encapsulations
DHCP DHCP Client, Server, Proxy and Relay for siplified TCP/IP configuration
PPP/MLPPP Support of Point to Point Protocol (PPP) for establishing of standard PPP connections, inclusive the
Multilink extension MLPPP for the bundeling of several connections
IPoA Enables the easy routing of IP via ATM
DNS Forwarding Enables the forwarding of DNS requests of free configurable domains to assigned DNS server.
PPPoE (Server/Client) Point-to-Point Protocol over Ethernet (Client and Server) for establisching of PPP connections via
Ethernet/DSL (RFC 2516)
