Dil ID: 14
Dil Adı: sloavakia
Dil Kodu: sk5tayfun Produkty značky Bintec-elmeg
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



bintec RS353jv-4G
09.12.2014
Subject to technical alterations
Page 5 / 11
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [email protected] - www.bintec-elmeg.com
Protocols / Encapsulations
PPPoE (Server/Client) Point-to-Point Protocol over Ethernet (Client and Server) for establisching of PPP connections via
Ethernet/DSL (RFC 2516)
Packet size controling Adaption of PMTU or automatic packet size controling via fragmentation
DNS DNS client, DNS server, DNS relay and DNS proxy
PPPoA Point to Point Protocol over ATM for establishing of PPP connections via ATM/DSL
DYN DNS Enables the registering of dynamic assigned IP addresses at adynamic DNS provider, e.g. for
establishing of VPN connections
MLPPPoE (Server/Client) Multilink extension MLPPPoE for bundeling several PPPoE connections (only if both sides support
MLPPPoE)
DHCP DHCP Client, Server, Proxy and Relay for siplified TCP/IP configuration
PPP/MLPPP Support of Point to Point Protocol (PPP) for establishing of standard PPP connections, inclusive the
Multilink extension MLPPP for the bundeling of several connections
IPoA Enables the easy routing of IP via ATM
DNS Forwarding Enables the forwarding of DNS requests of free configurable domains to assigned DNS server.
Quality of Service (QoS)
TCP Download Rate Control For reservation of bandwidth for VoIP connections
Layer2/3 tagging Conversion of 802.1p layer 2 priorisation information to layer 3 diffserv attributes
DiffServ Priority Queuing of packets on the basis of the DiffServ/TOS field
Policy based Traffic Shapping Dynamic bandwidth management via IP traffic shaping
Bandwidth reservation Dynamic reservation of bandwidth, allocation of guaranteed and maximum bandwidths
Redundancy / Loadbalancing
BRRP Optional: Bintec Router Redundancy Protocol for backup of several passive or active devices with
free selectable priority
BoD Bandwidth on Demand: dynamic bandwidth to suit data traffic load
VPN backup Simple VPN backup via different media. Additional enables the bintec elmeg interface based VPN
concept the application of routing protocols for VPN connections.
Load Balancing Static and dynamic load balancing to several WAN connections on IP layer
Layer 2 Functionality
Bridging Support of layer 2 bridging with the possibility of separation of network segment via the
configuration of bridge groups
Proxy ARP Enables the router to answer ARP requests for hosts, which are accessible via the router. That
enables the remote clients to use an IP address from the local net.