Produkty značky Belkin

T a b l e o f C o n t e n t s 1 2 3 65SECTION 4

Double N+ Wireless USB Adapter

USING THE BELKIN WIRELESS NETWORKING UTILITY

WEP Setup

64-Bit WEP Encryption

1. Select “WEP” from the “Data Encryption” drop-down menu.

2. After selecting your WEP encryption mode, you can enter your key

bytypinginthehexkeymanually.

 Ahex(hexadecimal)keyisacombinationofnumbersand

lettersfromA–Fand0–9.For64-bitWEP,youmustenter10hex

characters.

For instance:

AF 0F 4B C3 D4 = 64-bit WEP key

3. Click “Save” to finish. Encryption in the wireless router (or access

point) is now set. Each of your computers on your wireless network

will now must be configured with the same security settings.

WARNING: If you are using a wireless client to turn on the

security settings in your wireless router (or access point), you will

temporarily lose your wireless connection until you activate security

on your wireless client. Please record the key prior to applying

changes in the wireless router (or access point). If you don’t

rememberthehexkey,yourclientwillbelockedoutofthewireless

router (or access point).