18
The type of call forwarding can be set by pressing the
Foxkey under “uncond” (unconditional), “busy” or
“delayed”:
uncond Call is forwarded immediately
busy Call is forwarded if your telephone is busy
delayed Call is forwarded after a fixed delay
(approx. 15 seconds)
off Call forwarding deactivated
Enter the number to which calls should be forwarded
and press the Foxkey under “ok” to store the setting.
Call forwarding is activated.
Call Forward A, B and C allows calls to MSNs A, B and C to be forwarded separately.
If you always use the same forwarding type and the same forwarding number, you can
simplify the procedure by pre-programming auto-dial keys (see section on
“Programming auto-dial keys”). This will only work if both the forwarding type and the
forwarding number are programmed.
For operation in conjunction with a PBX, please refer to the relevant section in your PBX
operating manual.
Setting the ringing melody / volume.
You have the choice of seven different ringing melodies and volumes.
Press the MENU key repeatedly until “Telephone
settings” is displayed. Press the Foxkey repeatedly under
until “Melody A” is displayed.
Press the Foxkey under “change”.
Select the melody from the range 0 to 6.
Store by pressing the Foxkey under “ok”.
Select the volume between levels 0 to 6.
Press the Foxkey under “ok” to store.
Melody A, B and C allows you to program a different melody for each MSN.
ok uncond
Call Forward A: off
busy
Dest-No: __
ok del
Telephone settings
ok
4
Melody A:
1
change
Melody A:
ok
Volume:
2
Programming your telephone
ETK30_6.PM6 19.03.97, 17:3018
