TD 92675EN
20 June 2012 / Ver. E
Configuration Manual
Ascom i62 VoWiFi Handset
72
Appendix A: Working
Appendix A: Working with Templates
This section describes how to manage templates when using both the PDM and the Device
Manager in the IMS3.
When creating a template in the PDM and in the Device Manager, the templates must be
identical to avoid that the template’s parameters override each other when synchronizing
the handset with PDM or Device Manager.
A template can simply be copied between PDM and Device Manager.
The following workflow describes how to create a template in the Device Manager and then
copy it to the PDM. However, it is also possible to create a template in PDM and copy it to the
Device Manager.
A.1 Create a Template
1 Open the Device Manager in the IMS3.
2 Select the “Templates“ tab and open the menu “Template > New...“. The New
Tem
plate window is opened.
3 Select the corresponding device type and pa
rameter version that matches the
software version installed on the handset. Give the template a descriptive name.
The parameters that are not part of the template wi
ll be left unchanged on the handset. The
parameter version of an installed handset is visible under the Numbers tab or the Devices
tab.
4Click “OK“.
5 Select the checkbox of each parameter that you want to be
part of this template and
enter the proper value.
6 Click “OK“ to save the template.
A.2 Export a Template
1 Open the Device Manager in the IMS3.
2 Select the “Templates“ tab.
3 Select the template to be exported.
4 Select “Template“ > “Export“. Alternatively, right-click the
template and select
“Export...“. The Export tem
plates window is opened.
5 Give the template (*.tpl) a descriptive name and cl
ick “Save“.
See also A.3 Import
a Parameter File.
A.3 Import a Parameter File
The parameter version file (*.def) the template is based on, must have been imported to the
PDM to be able to import the template later on. If the parameter file is not imported, do as
follows:
1 Open the PDM.
2 Select “File“ > “File management“.
3 Select the “Parameter definition“ tab.
4 Click “Add“. The Import files window is opened.
