The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron, the Crestron logo, 3-Series, 3-Series Control System, Cresnet, Crestron Fusion, Crestron Mobile, Crestron
Mobile Pro, Crestron Studio, Crestron Toolbox, Fusion EM, Fusion RV, RoomView, and Smart Graphics are either
trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. BACnet is
either a trademark or registered trademark of American Society of Heating, Refrigerating and Air-Conditioning
Engineers, Inc. in the United States and/or other countries. Apple, iPad, and iPhone are either trademarks or registered
trademarks of Apple Inc. in the United States and/or other countries. IOS is either a trademark or registered trademark of
Cisco Technology, Inc. in the United States and/or other countries. Android is either a trademark or registered trademark
of Google, Inc. in the United States and/or other countries. Internet Explorer, Microsoft, and Windows are either
trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Samsung
Smart TV is either a trademark or registered trademark of Samsung Electronics Co., Ltd. In the United Stated and/or
other countries. SD and SDHC are either trademarks or registered trademarks of SD-3C, LLC in the United States and/or
other countries. UL and the UL logo are either trademarks or registered trademarks of Underwriters Laboratories, Inc. in
the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this
document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or
photography.
This document was written by the Technical Publications department at Crestron.
©2013 Crestron Electronics, Inc.
This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc.
As of the date of manufacture, the DIN-AP3 has been tested and found to comply with specifications for CE
marking and standards per EMC and Radiocommunications Compliance Labelling.
Federal Communications Commission (FCC) Compliance Statement
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Industry Canada (IC) Compliance Statement
CAN ICES-3(B)/NMB-3(B)
