INSTALLATION
4
Securing the mounting plate and drill on the wall
1
Pipe hole
Center of hole( 65mm)
Center of hole( 65mm)
Drill on the wall
Operation
2.Use the aiguille to drill a hole with a diameter of 65mm .
1.Confirm the position of the wall hole according to the chart (If it need to orientat a hole on the left
side of the mounting plate, please refer to the method of orientating the right wall hole in the above chart).
Secure the mounting plate
The mounting plate should be attached to the structural part of wall (post etc).
fasten string at the central hole
105mm
or more
from sidewall
NOTICE:
The holes at solid arrow position must be secured to avoid the shake of mounting plate.
When the expansion bolts are used, two holes ( 11 20 or 11 26 ) that the distance
between them is 450mm should be adopted.
Tapping screw
ST4 25(5)
plumb
mounting plate
at l
ea
st 250
m
m
from sidew
all
15
5m
m or mo
re
Note:Different models have different mounting plates, the installing charts of this book are presented
just for the purpose of illustration, please take the real objects as reference.
