–6–
¡ª
COOL mode operation procedure
4.Press FAN button, set
fan speed.
5.Press TEMP. but-
ton, set suitable SET
TEMP.
2.Press MODE button,
set operation
mode.
3.Press SWING button,
the louvers start to ro-
tate automatically, and
stop when repress.
1.Plug in, press 1/0 button,then air
conditioner is turned on.
•
According to difference between room temp. and set temp., microcomputer can control
cooling on or not.
•
If room temp. is higher than set temp., compressor runs at COOL mode.
•
If room temp. is lower than set temp., compressor stops and only indoor fan motor
runs.
•
SET TEMP. should be in range of 16°C to 30°C.
