Section 1: Overview
Page 1-2 PN 9001101 Rev. A SATO M10e
GENERAL PRINTER SPECIFICATIONS
SPECIFICATION M10e
PRINT
Method Direct or Thermal Transfer
Speed (User Selectable) 3 to 5 ips
75 to 125 mm/s
Print Module (Dot Size) ..0033 in.
.083 mm
Resolution 309 dpi
12 d/mm
Maximum Print Width 10.5 in.
266 mm
Maximum Print Length 16.5 in.
420 mm
MEDIA
Minimum Width 5.16 in.
131 mm
Minimum Length 1.7 in.
43 mm
Maximum Width 11.8 in.
300 mm
Type Roll or Fan-Fold Die Cut Labels
Thermally Sensitive for M10eDT
Maximum Caliper 0.008 in.
0.21 mm
Roll OD (max) Face-In 7.8 in.
200 mm
Core ID (min) 3 in
76.2 mm
SENSING
See-Thru Fixed, 0.9 in. (22.5 mm) left of center
Reflective Eye-Mark Fixed, 0.2 in. (5 mm) from left label edge
Continuous Form Not Used
RIBBON
Widths 6.5 in. (165 mm), 8.7 in. (220 mm), 10.7 in.(273 mm)
Length (max) 984 ft. (300 m)
Thickness 4.5 micron, Wound Face-In
