4
Put the label through the fan-fold
opening.
Slide and adjust the label stopper
to touch the side of label slightly.
Fan-fold label
Label stopper
5
Thread the label under the label
guide and pitch sensor.
Make sure that the side of label
touches the guide roller slightly.
Pitch sensor
Guide roller Label guide
*Thermal head and the
surrounding areas will become
hot during the printing process.
When changing the label after
printing, be careful not to get
burnt.
*Contacting the edge of thermal
head with bare hands may
result in injury.
When changing the labels, be
careful not to get injured.
Caution
13
