2
Push the lamp base completely into the socket.
Install the Lamp and Shades
Install the Fixture
Connect the mounting plate ground wire to a suitable
ground according to local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
Mount the fixture by sliding it back onto the mounting
plate and reinstalling the two Allen screws (reversal of
figure 1A).
1
2
3
4
1
1
2
3
2A
2
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
LAMP
SOCKET
NOTE: Use only your fingers and a soft cloth to
replace the lamp.
Use Volt, type T4, G9 baseMAX 60120 Watt
bi-pin halogen lamp in each socket.
3A
