Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing:
- Setting of the water softener
- End of programme
- Something not working with the machine
Deactivation/activation of the audible signals
(The dishwasher must be switched off)
Factory setting: audible signals activated
1. Press the On/Off button. All programme selection buttons
indicator lights will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated, this means that a washing programme has
been selected.
The programme must be cancelled: press simultaneously
function buttons 2 and 3 for about 2 seconds, the indicator
light of the set programme button starts flashing for about 2
seconds. After about 2 seconds the indicator lights of all
the programme selection buttons will illuminate indicating
that the set programme has been cancelled and that the
machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, the indicator
lights of function buttons 1, 2 and 3 start flashing.
3. Press function button 3, the indicator lights of function
buttons 1 and 2 turn off while the indicator light of function
button 3 goes on flashing, at the same time the END OF
CYCLE indicator light illuminates indicating that the audible
signals are active.
4. To deactivate the audible signals, press again function
button 3, the END OF CYCLE indicator light turns off,
indicating that the audible signals have been deactivated.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
To activate again the audible signals simply follow the above
operations until the END OF CYCLE indicator light illuminates.
5
