6
IMPORTANT!
Select the washing programme and the delay start with the door slightly opened. The start of the
programme or the countdown of the delay start will occur only after the closure of the door.
Until that moment it is possible to modify the set made.
Digital display
In the digital display is indicated:
- the level of hardness to which the water softener is set,
- the approximate remaining time of the running programme,
- the end of the programme ( a zero is visible),
- the countdown of the delay start,
- fault codes concerning malfunction of the appliance.
Programme selection
buttons
● Starting the washing programme:
1. Press the On/Off button.
2. Press the button corresponding to the required programme, the
corresponding light remains illuminated while the other programme
lights turn off. In the digital display will appear, flashing, the running
time of the programme (in minutes).
3. The programme in progress light illuminates.
4. Close the dishwasher’s door, the programme will start automatically.
In the digital display the running time of the programme is no longer
flashing and the programme in progress light remains illuminated.
IMPORTANT!
Once the programme has started, if you want to change the selection made
you must cancel the washing programme in progress.
● Cancel the washing programme in progress:
1. Press and hold simultaneously function buttons 2 and 3 until ALL
programme button lights will illuminate.
2. Release function buttons 2 and 3.
3. Switch off the machine by pressing the On/Off button or select a new
washing programme (check that there is detergent in the detergent
dispenser.
156997 71/0en 28-10-2006 11:52 Pagina 6
