SETTINGS
PROGRAMME SELECTION MODE
The appliance is in programme selection mode when the programme indicator is flashing and the
display shows the programme duration.
When the appliance is in programme selection mode, it is possible to set a programme and to enter the
user mode.
If the control panel does not show this condition, do the Reset function.
RESET FUNCTION
Press and hold simultaneously and until the appliance is in programme selection mode.
With this function you can cancel the running programme or the delay start.
USER MODE
While the appliance is in programme selection mode:
1. Press and hold and .
• The indicators , and start to flash.
In user mode can be changed:
• The level of the water softener according to the water hardness.
• The activation or deactivation of the rinse aid empty notification.
These settings will be saved until you change them again.
7
