Adjusting the door balance
When the dishwasher door is correctly balanced it
will remain in position when left ajar. The door
balance may need to be adjusted when the decor
panel is fitted. Turn the screws until the correct
balance is reached:
- heavy panel - turn clockwise
- light panel - turn anticlockwise
Levelling
Good levelling is essential for correct closure and
sealing of the door. When the appliance is correctly
levelled, the door will not catch on the levelling
spacers, either side of the cabinet.
If the door does not close correctly, loosen or
tighten the adjustable feet until the machine is
perfectly level.
Fixing to the adjacent units
To prevent the dishwasher tilting, it must be
secured to either the worktop or adjacent kitchen
cabinet/wall using the brackets supplied. Insert the
two fixing brackets into the slots provided in the top
front part of the dishwasher as shown in the figure.
Secure the brackets to adjacent units with the 3.5 x 16
screws using the upper or the side holes.
The appliance must be secured to the
underside of the worktop using the brackets
provided.
Failure to do this could cause damage or
injury.
48
PFI08GB
II47
II54
