29
5. Cover the screw holes on the sides with the
supplied plastic plugs. Push in the plugs
diagonally to fit them in place.
6. Check that the dishwasher's two front steel feet
are solidly placed on the floor, that is, the
dishwasher is not hanging in the air. Otherwise
turn the front feet to lower them.
Also adjust the rear foot if necessary so that the
dishwasher is level.
7. Tighten the lock nuts on the front feet with
6mm open-ended wrench.
Step 7. Attaching the toe kick (if applicable)
When fitting the kickboard, choose a size best
suited to the installation. Start by testing the high
kickboard. If the dishwasher door hits the
kickboard when opened, change to the lower
kickboard. For installations with a worktop height
of 900 mm, the higher kickboard is recommended.
For installations with a worktop height of 850 mm,
the lower kickboard is recommended.
Securing to worktop
Securing to side cabinets
