4. Run hot water at sink nearest dishwasher until
it is hot. Turn it off.
CYCLE SELECTOR BUllONS
OPTldil SELECTOR BUllONS
Starting your dishwasher
POTS & PANS Cycle...
1. Push POTS & PANS Cycle Selector Button.
2. Push button for option desired.
3. Turn Cycle Control Knob clockwise to
dot marked POTS & PANS. The dish-
washer will automatically start that
cycle.
NORMAL WASH Cycle...
1. Push NORMAL WASH Cycle Selector But-
ton. NORMAL WASH and LOW ENERGY
WASH Cycles share the same Cycle Se-
lector Button. The Control Knob setting
determines which cycle operates.
2. Push button for option desired.
3. Turn Cycle Control Knob clockwise to
dot marked NORMAL WASH. The dish-
washer will automatically start that
cycle.
LOW ENERGY WASH Cycle...
1. Push LOW ENERGY WASH Cycle Selector
- LOW ENERGY WASH and NORMAL WASH
Button.
Cycles share the same Cycle Selector
Button. The Control Knob setting deter-
mines which cycle operates.
2. Push button for option desired.
3. Turn Cycle Control Knob clockwise to
dot marked LOW ENERGY WASH. The dish-
washer will automatically start that
cycle.
RINSE & HOLD Cycle...
2. Select AIR DRY Option only.
1. Push RINSE & HOLD Cycle Selector
3. Turn Cycle Control Knob clockwise to
dot marked RINSE & HOLD. The dish-
Button.
washer will automatically start that
cycle.
Selecting a cycle
POTS & PANS Cycle
Maximum cleaning for cooked- or
baked-on foods. Timer delays while
the dishwasher automatically heats
the water to 145’F (63%) in both
washes and the last rinse(marked ‘1.
Cycle time will be about 1% to 2
hours, depending on time needed
to heat water.
NORMAL WASH Cycle
For normal, everyday soiled loads.
[The Energy Guide Label data is
based on this Cycle.] Cycle time is
about 58 minutes.
8
