GB -3-
Daily check
2
3
Adding rinse aid (not necessary when you use tablets). How to adjust the rinse aid dosage regulator
Daily use
Visual indicator
(depending
on model).
Unscrew cap.
Fill the salt
reservoir with
water before the
first wash only.
Add salt
(never add
detergent!).
min. 1.5 kg
max. 2 kg
Visual indicator (depending
on model). Screw on the cap.
Salt residues around cap
need to be removed.
If required, open
the cover (press
lever).
Open the cover A
(press lever).
Only fill the
detergent dispenser
prior to starting a
wash programme.
Use only one tablet per cycle,
placed in the detergent
dispenser.
Tablet / gel / powder
Add rinse aid
to max.
line ~100 ml
The rinse aid dosage can be adjusted to the
detergent used. The lower the setting, the less
rinse aid is dispensed (factory setting: position 4).
Press the lever to open the cover. Using a coin or
similar object, turn the arrow to the desired
setting. After adjusting the rinse aid setting, shut
the cover again.
Visual
indicator B
Adding detergent - Use only detergent specifically for dishwashers in accordance with the supplier’s recommendations
Filling the salt reservoir - Dissolve limescale (not necessary if water hardness level is set to “soft”!)
