GB
-2-
First time use
1- salt reservoir
2- rinse aid dispenser
3- detergent dispenser
4- racks system
5,6,7,8- available functions on the panel
9- filters
10- spray arms
In order to always ensure the best cleaning
results, you NEED to set:
DETERGENT type and WATER HARDNESS.
1.
Press and hold
PROGRAMME
SELECTION button,
also press the
DELAYED START
button
2a.
Check your
DETERGENT TYPE…
2b.
… and set it on your dishwasher
using the DELAYED START
button (shown on the display)
3.
Remember to use salt and rinse aid
when needed (as indicated below)
4.
Wait 5 seconds or switch off
the appliance, the selected
detergent type is memorised.
It is shown on the display for
approx. 3 seconds after the
appliance is switched on.
Note that only after changing
the detergent type it is
possible to select the desired
programme and, if necessary,
select the delayed start
button.
Powder or gel
(factory setting)
add salt add rinse aid
Tablet 2 in 1
add salt
Tablet 3 in 1
Tablet All in 1
For models without “detergent type” option, the salt and rinse aid indicators will be lit when tablets are used.
rinse aid
salt
rinse aid
How to set water hardness
* only before the first wash or if
the water hardness has been
changed
Switch on the appliance
- Select the 2nd programme “P2” - consult the table of programmes.
- Press the START button for at least 5 seconds until the START indicator lamp flashes.
- The water hardness setting is shown on the display (if present) or the START button flashes.
- With each successive touch of the START button the setting increases and when it reaches 7 it returns to 1 again.
- The appliance must be switched off to memorise the new setting.
Even if you use tablets which include salt,
you must still add salt since such
detergents are not effective enough at
softening hard water.
Water hardness level is factory set for
medium hard water (a number “4” is
shown on the display or the START
indicator lamp flashes 4 times).
1.
Ask your water supply company
what the
water hardness
is...
2.
...enter this value on your
dishwasher
Suggestions for detergent use
French
degrees °fH
Water
hardness
Dishwasher with
display: insert
value in the
display
Dishwasher
without display:
count START
button led flashes
Gel or Powder
(rinse aid and
salt)
Tab le ts
0 - 9 Soft 1 1x
go to step 1
(see “Daily
check”)
if extra salt is
needed go to
step 1
(see “Daily
check”)
10 - 18 Medium 2 2x
19 - 27 Average 3 3x
28 - 37 Medium-hard 4 4x
38 - 50 Hard 5 5x
51 - 63 Very hard 6 6x
64 - 107 Extremely hard 7 7x
How to set detergent type: powder/gel/tablet (if option is available)
