User instructions
17
SUPPLY
Connect the intake hose to a cold
water supply with ¾” gas thread,
inserting the filter A
dishwasher.
hose firmly into place with your
hands and then complete by
tightening about ¼ of a turn with
pliers.
In
dishwashers equipped with the
ACQUASTOP device, the filters is
already fitted inside the threaded
ring.
The dishwasher can also be connected to a hot
water supply not exceeding 60°C
appliance with hot water cuts down the washing
time by approximately 20 minutes, but slightly
reduces its effectiveness.
the domestic hot water supply using the same
procedure described for connecting to the cold
water supply.
