The dishes were not
loaded correctly .
See notes in " Load ing the Dishwash er Basket s ".
Select a more intensive programme.
See" Wash Cycle Table ."
Use more detergent, or change your detergent.
Rearrange the item s so that the sp ay can rotate freely.r
Clean and/or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray
Arms".
r
Use less detergent if you have soft wa ter and select
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once t
he dishes are barely warm to the touch. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket.
In short program the washing temperature is lower.
This also lowers cleaning performance. Choose
a program with a long washing time.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
The programme was
not powerf ul enough.
Not enough detergen t
was dispensed.
Items are blocking
the path of spray arms.
The filter combination
inthebaseofwash
cabinet is not clean or
is not correctly fitted.
This m ay cause
the sp ay arm jets
to get blocked.
r
Combin at ion of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse-aid
Dishes are removed
too soon
Wrong program
has bee n selected
Use of cutlery with
a low-quality coating
Error Codes
Tap is not opened, or water intake is restricted,or water pressure
is too low .
Malfunction of temperature sensor or of heating element.
Too mu ch i nlet w ater.
Short circuit or break of temperature sensor
Open circuit or break of temperature sensor
Long er inlet time.
Longer heating time,
but not reaching required temperature
Overfilled.
Failure of temperatu re sensor
Failure of temperatu re sensor
When some malfunctions come on, the applianc e will display error codes to warn you:
If overf low occurs, tur n off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before resta rting the dishwasher .
24
Uns a ti s
-factory
was hin g
res u lt
Uns a ti s
-factory
dry i ng
res u lt
