CM-80/80E INSTRUCTION MANUAL ULTRA
★
STEREO LABS, INC.
- 15 -
voltage to the Exciter Supply output terminals.
Rear Panel: Three Trimpots adjust the Processor, Amplifier and
VU Meter input levels.
CM-80E Exciter Supply module only: A 15 turn trimpot adjusts
the Exciter Supply DC output from 3.7 to 8.5VDC. LED’s
indicate DC output and AC Emergency/DC Normal status.
Power Requirements
A two position switch on the rear of the CM-80/80E selects 106
~ 125 VAC or 212 ~ 250 VAC, 50-60 cycles.
CM-80: approximately 15 watts.
CM-80E: approximately 52 watts.
Construction
The CM-80 Monitor and CM-80E Monitor/Exciter Supply are
constructed of steel to minimize hum pickup and noise radiation
from the Exciter Supply module. Gold plated card edge
connectors and 1% precision components are used through-
out. The overall size of the unit is 5.22" x 19" x 8". The CM-80
and CM-80E are designed to mount in a standard rack frame or
cabinet.
CM-80 CM-80E
Weight: 10 lbs. 17 lbs.
Shipping Weight: 12 lbs. 19 lbs.
