Naming the Channels
You can name at least 20 channels with four characters in each name.
Full appears beside Label when the memory is used up. Fixed appears
when a channel number cannot be named. Below are the characters
that can be used in a name.
Using Advanced Features
1. Name a channel
12
Controls Alarm Adjust Setup
utOprofliML
[Sisf;
Channel Memory: 12 Stored
Cable/Air: Cable
VCR 1 Channel: 00 :
NBC 12
Controls Alarm Adjust Setup
Autoproqram
Label: 12 NBC
Channel Memory:; 13 Stored
Cable/Air: Cable
VCR 1 Channel: 00 .
A. Press MENU'PROG repeatedly
to select the Setup menu. This
menu is white.
B. Press MOVE ▼ to highlight
Label.
C. Press MOVE ► to underline the
channel number.
D. Select the channel number with
the number buttons.
E. Press MOVE ► to underline the
first character of the name.
F. Choose the character using
MOVE A or T.
G. Repeat E-F to complete the
name.
H. Press MOVE ◄ to move
backward if you want to
change an item.
2. Erase a name
12
Controls Alarm Adjust Setup
Autoproqram
Label: 12
Channel Memory: 13 Stored
Cable/Air: Cable ,
VCR 1 Channel: 00
A. Follow A and B above.
B. Press MOVE ► until clear is
underlined.
C. Press MOVE A or ▼ to clear the
name.
Character List
ABCDEFGHIJKLMNOPQRSTUVWXYZ&
()a+,-./01 23456 789:;< = >?@ blank space
20
