Picture Menu
1 Push the “Menu” Button.
2.Select the “Picture” Menu by pushing the
Position Up “A” or Down “T” Button and
Access the “Picture” Menu by pushing the
“STR” Button.
S.Select the required function by pushing the
Position Up “A” or Down “T”buttons, and
access and alter the setting by pushing the
Position Left or Right buttons.
MENU
□
1,2
LÂJ
STR
i=i> an HE
™^AcC9SS
oano
(&-Sriect
Sound
Signal
Set up
Pirtiirp CDoao
j I Picture Mode 1 Dvnamic 1
1
1
1 Colour
L o ir - A . J ; |
|Tint
[o il ' A ' H [
1
Brightness
Contrast
l^ E z r!= a l
1 Sharpness
[U f
—
^ - ^ 1
1 White balance
1 Warm [ 1
1 Manual W/B
nsm On [|
MENU
QExIt
Note:
(1) You can change the level of each Function
(Picture Mode, Colour, Tint, Brightness,
Contrast, Sharpness, White balance) for each
picture Menu.
(2) The setting details for normal and dynamic
respectively are memorised separately for five
types of input signal format (NTSC, PAL,
SECAM, 1080i and RGB/PC). (NTSC includes
525i and 525p (480p) signals, and PAL
includes 625i signals.)
Picture Mode
Function
Normal
For viewing in normal (evening lighting)
environments.
This menu selects the normal levels of
Brightness and Contrast.
Dynamic
For viewing in brighter environments.
This menu selects a higher than normal
levels of Brightness and Contrast.
Item
Effect
Adjustment range
Picture
Mode
< ►
Normal / Dynamic
Colour
◄ ►
Less Mere
-30 F—k—ii30
Tint
(NTSC only)
◄ ►
Reddish Greenish
-30 C7 l ^ 1 30
Brightness
◄ ►
Dari»r Bright«
■isF—A—A15
Contrast
◄ ►
Less More
-30 F—F—A 30
Sharpness
◄ ►
Lass More
■15 F—k—A 15
White
balance
4 ►
Warm / Normal / Cool
Manual W/B
4 ►
Off/On
Note:
(1) The ‘Tint” setting can be adjusted for NTSC
signal only.
(2) “Colour"’, ‘Tinf and “Sharpness” settings
cannot be adjusted during “RGB” and “PC”
input signal modes.
(3) If the “Manual W/B” setting is changed to ON
and the Position Down “T” button is pressed,
the “Manual W/B” menu will be displayed.
(Refer to page 25.)
(4) The adjustment range values should be used
as an adjustment reference.
Helpful Hint ([^Normalisation)
If the N button on the remote control unit is pressed when the “Picture” menu is displayed, all adjustment values will
be returned to the factory setting level of each picture mode.
24
