PICTURE POS./SIZE Controls
GD
PICTURE
P0S./SIZE
PICTURE P0S./S1ZE button
When the PICTURE POS./SIZE button is
pressed, the Picture Pos./Size menu appears,
and the picture size and vertical picture
position can then be adjusted.
The adjustable items and adjustment ranges
vary for each input signal and aspect mode.
During “AV(S-Video)” and
The Position Left and
Right buttons can be used
to change the picture size.
The Position Up “A” and
Down buttons can be
used to adjust the vertical
picture position.
Component*’ input signai modes
DCB
[S
Picture Pos./Size
Nonral 133 Q
CXI a Ш—Si»
pQaitroTl ■ гу) I )
Size
PICTURE
POS^rZE
□ Bill
Note:
(1) The picture size cannot be changed in “Zooml” mode when
a 525p (480p) component signal is being input.
(2) The vertical position cannot be changed when Size 1 and
Size 2 have been selected in “4:3” mode and when Size 1
has been selected in "16:9” mode. In addition, the vertical
position cannot be changed when 1080i signals are being
input.
(3) Adjustment details are memorised separately for different
input signal formats (NTSC/PAL/SECAM, 525p (480p),
1080i, 525i and 625i).
(4) If a “Cue” or "Rew” signal from a VCR or DVD player is
received, the picture position will shift up or down. This
picture position movement cannot be controlled by the
Picture Pos./Size function.
20
