v:
Before Operating This Set
Connecting the Aerial cable to the RF In Terminal
To obtain optimum quality picture and sound, an Aerial, the correct cable (75
Ohm coaxial) and the correct terminating plug are required.
If a communal Aerial system is used, you may require the correct connection
cable and plug between the wall Aerial socket and your television receiver.
Your local Television Service Centre or Dealer may be able to assist you in
obtaining the correct Aerial system for your particular area and accessories
required.
Any matters regarding Aerial installation, upgrading of existing systems or
accessories required, and the costs incurred, are the responsibility of you, the
Customer.
Connecting the Plug to the Wall outlet
Note:
• Mains plug types vary between countries. The mains plug shown at left
may therefore not be the type fitted to your set.
How to turn the Power On
Press the Power switch on Television to turn the set on. (See page 14)
