Menu Operation
Channel search
Press ® ( g ) to show freeze-frames of the
programmes being broadcast on all of the stored channels.
These images are displayed in series clockwise around the
edge of the screen, starting from the top left.
The current programme is displayed in the centre of the
screen, still playing.
The feature cycles through the stored channels until either
IS i ®) is pressed to pause the search or )
^ ESP tXiW»» ™
is pressed to exit the feature.
Press the red button to select each channel's freeze-frame in turn.
Press the green button to watch the selected channel, exiting
the feature.
Press the blue button to watch the current programme
(displayed centre screen), exiting the feature.
INHX
0H8IMKH
(MHWCH
GHttIMM
sm
STILL
Red Green Ysllw Blue
Channel search
Pk:tureandte)d(|Ntoincfication fbrTO-29P250HandTC-34P250H)
Press to move between watching the current
programme, viewing teietext and the picture and text
feature. Picture and text lets you see the current programme
and a page of teletext side by side.
Whilst using this feature, the remote control affects the
teletext page; if you wish to make changes to the programme
viewed press to return to watching the programme on
its own then make the desired changes.
TELETEXT mode Picture and text mode
Still
BT1LL
Press ^ ( g ) fe freeze the picture, press again to return
to watching the current programme.
STU
strobe
(Access Strobe via the Setup menu, see page 24). Takes a
series of up to twelve freeze-feame images (one second delay
between each image being taken) from the current
programme watched, these are displayed in series clockwise
around the edge of the screen, starting from the top left.
The current programme is displayed in the centre of the
screen, still playing. ^
To pause (freeze) Strobe, press ^(^)onthe remote control,
press again to continue taking the freeze-frames. To exit the
Strobe feature and return to watchmg the current programme,
press any button on the r^ote control oth^ than STILL.
HOLD
fi
snu.
1
J______' ' 1 EXIT L
Strobe mode
CHANGE Mode
When the CHANGE Mode is ON to Swap from Main picture
to sub picture and vice versa.
MULD
A bar is displayed at the bottom of the screen when g is
pressed. Press the yellow button to switch to Change mode.
MULTI
pp
'Mow
TV mode AV mode AV mode TV nnode
30
