Remote Control Transmitter Operations
J
1. TV/AV Selection Button
Press to select either TV mode or AV
mode.
2. Programme Number Up and
Down Buttons
Press these buttons to select the next
higher or lower Programme Number.
3. Volume Up and Down Buttons
Press these buttons to adjust the sound
level.
4. Direct Programme Number
Selection Buttons.
To select a Programme Number between
0 and 9 press the desired number.
5. Two Digit Programme Number
Selection Button.
To directly access Programme Numbers
above 9 first press the - / - - button
followed by the two digits required.
For example: to select channel 12
1. Press the - / - - button
2. Press the 1 button
3. Press the 2 button
-
------------------------
'
-
-------
-
' *
1 2
-
6. Recall Button
This button can be used to display the
current Programme Number and the Off-
Timer setting.
Pressing the button again removes the
display from the screen.
NOTE: Do not leave the TV in Stand By mode for a long period of time. It is better to
switch off when you are away.
7. Off-Timer
The TV set can be preset to switch off
after a fixed period of time. The time is
changed each time the button is pressed.
do —30 —60 — 90 d
The timer can be reset by selecting the 0
position or by turning the TV OFF.
8. Normalization (N) Button
This button returns the COLOUR, NTSC
TINT, BRIGHTNESS, CONTRAST and
SHARPNESS to the factory preset levels.
The on-screen indicators turn from green
to yellow when at preset values.
9. Function (FUNC.) Button
Press this button to select the COLOUR,
NTSC TINT, BRIGHTNESS, CONTRAST
and SHARPNESS.
All functions can be adjusted using the
Voiume Up (+) and Volume Down (-)
buttons.
10. Sound Mute Button
Press this button to mute the sound. To
cancel the mute either press the Mute
button again or one of the voiume buttons.
11. Stand By Button
Press this button to put the TV into stand
by mode. To switch the TV back ON press
the Stand By button or the Programme
Number Up or Down button or any direct
access Programme Number Selection
Button (0 - 9).
