e.g. To select Programme Number 12,
( Remote Control Transmitter : General Operations^
1. TV/AV Selection Button
Press this button to select AV mode or TV mode.
2. Sound Mute Button
Press this button to mute the sound.
To cancel the mute mode ;
1. Press this button again
2. Press the Volume Up or Down button.
3. Recall Button
Press this button to display the current Programme
Number, Channel Number, Colour System, Sound
System, Off-Ttmer and Present Date mode.
In AV mode, a blue colour screen appears if there
is no AV signal (when the recall function is off).
Present date
r
2
CH4
AUTO
5.5 MHz
■►1994 10 1 (SAT)
12 :30
C__________
_
____________
J
4. Fast Forward Button
Press to fast forward the tape. During the playback
mode, press this button to view the picture in
forward rapidly.
—
■
►► FF
V
_________
.. .. .. .. j
5. Stop Button
Press to stop the tape.
f
■ STOP
6. Programme Number Up and Down Buttons
Press to select the next higher or next lower
Programme Number.
7. Volume Up and Down Buttons
Press to adjust the sound volume level.
8. Two Digit Programme Number Selection Button
Press the button and followed by the required
numbers to select Programme Number from
10 to 59.
1. Press this button once.
2. Press button number ” 1 ”.
3. Press button number" 2 ".
9. Normalization Button
This button can be used for setting the Colour.
Tint ( NTSC only ), Brightness, Contrast and
Sharpness
When this button is pressed, all functions setting
are reset to the factory preset level.
10. Channel Selection Button
You can select the actual channel number which can be
received in your area directly.
Press the "C" (Channel) button, then select the desired
channel directly.
e.g. To select broadcast transmission Channel Number 9.
r
CH
____
Y
_____________
J
i
—
CH
__
\______________
.J
1
—
CH_
\
_____________
______
y
1
CH9
V
___________
_
_
