9
TR H RO SK CZ PL FIN DK S N P NL E I F D GB
Cleaning
Always clean the frame, fast/gentle/beginner caps and discs
after use to keep them in a hygienic state.
Switch off and unplug the appliance before cleaning.
Dry cleaning
1. Lift the fast/gentle/
beginner caps upward
while holding the cap
release rib [BCD3] or
remove the frame by
pushing the frame
release button [G8].
2. Clean the epilation head [E]
and the shaver head [G] with
the cleaning brush [J].
Wet cleaning
1. Lift the fast/gentle/beginner caps upward while holding
the cap release rib [BCD3] or remove the frame by
pushing the frame release button [G8].
2. Apply liquid hand soap to the discs and the
blades.
3. Turn the switch on and then wet the discs and
the blades to create foam.
4. Wash the head with water to wash out
hair.
Do not use hot water.
If soap is not completely washed away,
then a white deposit can accumulate
and prevent the discs and the blades
from moving smoothly.
5. T
urn the switch off, wipe the appliance
with a dry cloth and dry it well.
Replacing the outer foil
We recommend replacing the outer foil [G6] every year and
the inner blade every two years. Remove the outer foil of the
shaver head [G] only when replacing it.
1. While pushing the outer f
oil gently with the fingers, use a
fingernail to release the plastic panel (b) on the blade
from the hooks (a) on the inside of the frame.
2. The ne
w outer f
oil should be slightly bent and pushed in
until it is hooked in the frame.
•
•
