Channel Caption
This feature allows you to enter the call names of up to 30
stations into memory (using up to 4 characters for each
station). The Channel Caption will then display along with
the channel number when changing channels or pressing
RECALL.
Melpful Hints:
When the Maximum amount of station identifiers are
entered, “FULL” will be displayed in the caption
position.
Channel Caption
(Station Identifier)
O
1. Press action .
2. Press or^^ and or to highlight the Channel
Caption Icon.
o
3. Press ACTION to display the Channel Caption Menu.
4. Press ^ or or use the Remote Control Keypad to
enter the channel number you wish to assign a Station
Identifier.
5. Press ^ to highlight ENTER CAPTION.
6. Press or ^ to select first character in Station
Identifier. Then press ^ to move cursor to the second
position and repeat until the complete Station Identifier
is entered (up to 4 characters).
7. Press A or ^ to highlight ENTER CHANNEL
NUMBER. Then repeat steps 4 through 6 to continue
adding Channel Station Identifier(s).
o
8. Press action twice to exit menus.
NOTE; To delete a Channel Caption (Station Identifier) from
memory all four character positions in the “ENTER
CAPTION” area must display a dash mark (-).
Timer Features
Sleep Timer
This feature is used for automatic turn off in 30, 60 or 90
minutes. Display will flash 3,2 and 1 to indicate the last three
remaining minutes prior to turn off. The Recall display will
also appear.
NOTE: This feature will be disabled when Auto Power
On is activated.
O
1. Press ACTION .
2. Press^^or^^and*^or^ to highlight the Timer Icon.
o
3. Press action to display the Timer Control Menu.
4. Press to select NO, 30, 60 or 90 minutes (Sleep
Timer will be activated).
O
5. Press action twice to exit menus.
NOTE: To deactivate Sleep Timer repeat steps 1 through 4.
In step 4 select “NO” instead of minutes.
Helpful Hints:
Press the RECALL button to display the remaining
minutes for Sleep Timer, the status will display in the
bottom left corner (red).
-13-
