2
Firmware Update for the TX-NR609, HT-RC360,
HT-R690 (HT-S7400/8400 receiver) & HT-R990 (HT-S9400THX receiver)
We are pleased to offer this firmware update for the best possible performance of your AV Receiver.
A firmware update is now available through the Network or USB connections on the TX-NR609, HT-RC360,
HT-R690 & HT-R990
Onkyo has discovered there is a possibility of failure when updating receivers to this new firmware
package via ethernet in certain network environments. For this reason, we are now only releasing a
firmware file for installation via USB port / flash memory device.
Latest Firmware Version: 1141-1700-0010-9107
The 10/18/2013 update will address the following: UPDATE AVAILABLE ONLY via USB (US ONLY)
1. Corrects lock up failure when using MiCasaVerde Vera Lite controller on the same network
The 09/11/13 update addresses the following (all above listed models): (Available via USB only)
1. Improves picture output of 4K up-scaling
The 06/1/2011 update addresses the following (all above listed models):
1. Improves audio/video output in HDMI Through mode
2. Stabilizes setting of a static IP address in Network Settings
3. Improves audio output when using Audyssey DSX
The 05/12/2011 update addresses the following (TX-NR-609 & HT-RC360):
1. Improves the noise with Picture Mode (Edge Enhancement, Custom, Cinema)
2. Improves the picture quality
3. Improves [NET/USB] playback
4. Enhances the display on the screen (OSD)
The 04/20/2011 update addresses the following (TX-NR-609 & HT-RC360):
1. Improves update functionality
2. Supports hexadecimal WEP keys in manual setting of UWF-1
The 04/01/2011 update addresses the following (TX-NR-609 & HT-RC360):
1. Supports UWF-1
