MIRACALL TECHNOLOGY CO.,LTD.
21
Program 10: Outgoing Call Setting (Night mode)
The upper row display: NGT LINE OUT SET
The lower row display: ST-XXXXXXXX
(Remarks: The authority for the extension to make outgoing calls in Night
time mode )
ST: 001-016(Extension port number,”***”represent all extensions)
XXXXXXXX: 0-1( the extension to use the relevant CO Line: “0”-Not
allow,”1”-Allow.CO Line 00000000 or 11111111, first “0” or “1” is first CO
Line, second stands for second CO Line…,)
Single line phone
Input program item code 10, then reminding tone is heard, that means
entering into system program status. Firstly input the extension port
number, press “
* ” jumping to extension port dialing-out parameter setting.
Press “
* ” again jumping to next extension setting, after finish that, press
“#”to return system program status.
(Default: ST-XXXXXXXX)
Program 11: Incoming Call Setting (Day mode)
The upper row display: DAY LINE IN SET
The lower row display: ST-XXXXXXXX
(Remarks: During Operator status, the incoming calls will or will not ring to
the desired extension in Day time mode )
