KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 32 -
values cannot exceed 13. These values are usually matched to the Copy Density Values in the backup
data mode of the print engine.
[RedCopyDensityValues]
Dark=19
MediumDark=14
Medium=11
MediumLight=9
Light=7
[CyanCopyDensityValues]
Dark=12
MediumDark=10
Medium=8
MediumLight=6
Light=5
[MagentaCopyDensityValues]
Dark=12
MediumDark=10
Medium=8
MediumLight=6
Light=5
[YellowCopyDensityValues]
Dark=12
MediumDark=10
Medium=8
MediumLight=6
Light=5
[PaperTypes]
Paper0=Bond
Paper1=Vellum
Paper2=Film
Paper3=OnHold
List of available paper types. This section should match the [PaperTypes] section in the winreq.ini. Once
configured, the user can force Unattend to use the custom type in Unattend’s CONFIG/MISC/ROLL INFO
pulldown section. This feature is used to override the paper-type signals coming from the print engine
drawer selections. Custom types may be manually added following this format: Papern=(6 characters or
less) i.e. Paper3=BluBnd
