KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 27 -
a. Below RasterThreshold1, it is best to apply a no setting command, (EG:
RasterSetting1=“blank”). Leave blank. Most “line” images fall under 2.8, these don’t need
any further settings.
b. Between RasterThreshold1 and RasterThreshold2; RasterSetting2 will be used.
c. Above RasterThreshold2; RasterSetting3 will be used.
Switches
These five switches must be used in conjunction with each other .
Z - Photo Mode ON
W 100 - Raster Density, lower numbers will “lighten” data.
u 0 - Raster Dither Pattern, values include 0,4,6, or 8. Same as RTL Density values. These two switches must
be used in conjunction with each other and BOTH must be used together.
q 1 – utilizes a “random” dither pattern, better for non-continuous tone images.
W 75 - Raster Density, lower numbers will “lighten” data.
[FoldPresets2.0]
ESizePortraitPreset=6
ESizeLandscapePreset=6
E2SizePortraitPreset=2
E2SizeLandscapePreset=2
E3SizePortraitPreset=2
E3SizeLandscapePreset=2
DSizePortraitPreset=6
DSizeLandscapePreset=6
D2SizePortraitPreset=2
D2SizeLandscapePreset=2
CSizePortraitPreset=2
CSizeLandscapePreset=2
C2SizePortraitPreset=2
C2SizeLandscapePreset=2
C3SizePortraitPreset=2
C3SizeLandscapePreset=2
BSizePortraitPreset=2
BSizeLandscapePreset=2
B2SizePortraitPreset=2
B2SizeLandscapePreset=2
ASizePortraitPreset=2
ASizeLandscapePreset=2
[MetricFoldPresets]
A0SizePortraitPreset=27
