KIP PrintNET
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. 2011 KIP America, Inc.
- 33 -
Other:
• Min Cut Length – instructs the printer to cut paper at no less than this length (in or mm)
• Max Image Length – instructs the printer to cut paper to no more than this length (ft or m)
• Image Width Removal (pixels) – Image width tolerance adjustment used for documents that
may be over 36”x36”. (e.g. image data is 36.5” x 36.5”, this is too large to print to the KIP. Value
set to 600 (600 pixels = 1 inch) would “ignore” any image data past 36”).
• Lead Edge Void (pixels) – amount of “white space” to add to the printed output. (600 pixels = 1
inch)
• Delay Between Sets (seconds) – Amount of time to pause the print queue between sets.
• JIS Tolerance (in) – Images sent to the IPS without a KIP Job Ticket (FTP/LPR) will be printed to
exact JIS sizes.
• Ignore Job Time – Unchecked verifies the time specified in the job ticket prior to printing. Used to
schedule print jobs for a later date/time.
• Hold Paper After Print – When Selected the printer will hold the paper in the ready position for 13
seconds.
• Preload Paper – When selected this will load the paper to the ready position for the next print.
• Ignore HDI Borders – When selected this will ignore borders that may be in by default within the
HDI (AC) driver.
• Enable Abacus – If available when selected this will enable the use of Abacus software.
Monochrome HPGL Processing:
• HPGL Min Line weight – Minimum line thickness that may be printed. If line specified is thinner
than configured setting, line thickness will be increased.
• HPGL Min Grayscale – Minimum shade of gray that may be printed. If fill area shade is less than
specified configured setting, shading will be “darkened”.
Uploads:
• IPS Installed Fonts – Displays fonts that are currently installed on the IPS.
