111
Install New Stitch Wire
Feed the Stitch-wire
[67]
4 Close the folder cover.
5 Close the connecting bridge
cover.
Step Action Information
Step Action Information
1Touch START.
3 Set the number of stitches to 6 Touch BASIC > STITCHES.
4 Hand-feed or print an A4 or
larger size test job.
The stitch-wire loads automatically
during the stitch head cycle.
5 Check that the stitch-wire is
loaded.
Check that a stitch is made. If needed,
repeat the previous step.
If a stitch is still not made, repeat the
procedure. Install the stitch-wire into
the stitch head Install the Stitch Wire
into the Stitch Head on page 110.
6 Reset the number of stitches
on the touch screen.
