9
Filter Removal
1. Turn the upper lter assembly a ¼ turn counterclockwise and lift out.
2. Grasp the lower lter in the circular opening, lift slightly, and pull forward
to remove.
3. Clean the lters as shown below.
Locating tab
To remove upper filter assembly
Cleaning
IMPORTANT: Do not use wire brush, scouring pad, etc., as they
may damage the lters.
Rinse lter under running water until most soils are removed. If
you have hard-to-remove soils or calcium deposits from hard
water, a soft brush may be required.
P
U
S
H
D
O
W
N
&
T
U
R
N
L
O
C
K
U
N
L
O
C
K
Filter Reinstallation
1. Noting the previous illustrations, place the lower lter under the Locating Tabs in
the bottom of the dishwasher so the round opening for the upper lter assembly
lines up with the round opening in the bottom of the tub.
2. Insert the upper lter assembly into the circular opening in the lower lter.
3. Slowly rotate the lter clockwise until it drops into place. Continue to rotate until
the lter is locked into place. If the lter is not fully seated (still turns freely),
continue to turn the lter clockwise until it drops and locks into place.
NOTE: The upper lter assembly arrow does not have to align with the arrow in the
lower lter as long as the lter is locked.
L
O
C
K
U
N
L
O
C
K
P
U
S
H
D
O
W
N
&
T
U
R
N
Locating tab
To replace upper filter assembly
IMPORTANT: To avoid damage to dishwasher, do not operate your dishwasher without the Ultra Wash
®
lters properly installed.
Be sure the lower lter is securely in place and the upper lter assembly is locked into place. If the upper lter assembly turns
freely, it is not locked into place.
